Denomination for a high drawer. The drawer divisions from Stratmann have a planning height of 140mm.
A cutlery insert or cutlery tray is traditionally used to store cutlery in the kitchen or in the dining room. The standard planning height of a cutlery tray at Stratmann is 54mm.
The internal width of a drawer will be measured between the left and right side of the drawer. When ordering cutlery inserts from Stratmann, it is useful to ascertain an internal width at the height of 54mm, if the drawer tapers downwards.
The interior depth of a drawer will be measured between the back wall and the front wall, respectively the aperture.
A drawer tapers downwards when the sides (sometimes also front and back) taper upwards. It is therefore less wide on the floor surface than on the upper edges.
A term for a kitchen cabinet or generally a piece of furniture consisting of two sides and an upper and a down side and a door and / or drawers.
The total width of the furniture measured from outer edge to outer edge.
Interior width of the furniture. It is obtained by subtracting twice the corpus strength from the width of the corpus.
A perforated plate is used in combination with kitchen utensils, which are fixed with the help of the holes in the plate, dishes, pots and the like, for organizing and fixing such elements in a drawer.
A utility or multipurpose insert has more generous divisions than a cutlery insert and, thus, it is suitable for the purpose of storing, among others, serving pieces, such as soup ladles, spatulas. Utility inserts can be complemented particularly well with accessories such as a knife block or spices insert.
The drawer or frame manufacturers produce the running rails and lateral sides of the drawers in grid sizes of 50mm. The nominal length refers to the length of the guide rail. The most common nominal length is of 500mm, suitable for a kitchen worktop of 600mm. Stratmann has deposited the nominal length for most kitchen manufacturers and can easily determine the depth of the drawer. Stratmann manufactures customized cutlery inserts for all interior depths.
Upward open cases, consisting of two sides (also named frames), a reverse side and an anterior side and a floor. The anterior side serves as an aperture or is present as a “doubled” front. Drawer inserts / cutlery inserts from Stratmann have a standard planning height of 54mm.
see frame manufacturer
The thickness of the side material of furniture. It is usually of 16, 18 or 19mm for kitchen cabinets.
The side of a drawer. In modern kitchens, the drawer sides are made of metal and the drawer is designed as a full-length drawer.
In the kitchen industry, frames or complete drawers are supplied by few manufacturers. Stratmann manufactures custom cutlery inserts, which are even at the level of the top edges. Most measures of the frame manufacturers are stored at Stratmann.